Journal of Analysis and Computation
Journal of Analysis and Computation
PERFORMANCE ANALYSIS AND EVALUATION OF PCM AIR HEAT
EXCHANGER FOR BUILDING VENTILATION APPLICATIONS
Sunil G. Dambhare¹, Rupesh J Patil², Sandeep U Kadam³
Professor, Dr. D. Y. Patil Institute of Engineering Management and Research, Pune, India¹
Principal Navsahyadri Grooup of Institutes Faculty of Engineering, Pune , India²
Associate Professor, Bhivarabai Sawant of Engineering and Research, Pune, India³
Keywords – heat exchanger, PCM, storage unit, heating power.
ABSTRACT
PCM to air heat exchanger storage system is a solution to store energy in building ventilation system. In this work PCM to air heat exchanger storage experimental system has been developed and tested. The heat exchanger is tested in a open loop which provide constant air flow rates with temperature changes selected such that PCM is allowed to melt & solidify. The PCM used for heat exchanger is paraffin wax. The air velocity during charging and discharging is varied from 0.5 m/sec to 2 m/sec and wattage from 500 W to 1000 W. The results shows that increase in the air velocity leads to decrease the charging time as well as discharging time and thus agitates the charging and or discharging. At 1000 W, charging time reduces by 60 % with increase in air velocity from 0.5 m/sec to 2 m/sec and at same wattage the discharging time reduces by 30% with increase in air velocity from 0.5 m/sec to 2 m/sec. This leads to conclusion that for fast charging and discharging can be achieved by increasing the air velocity.
A CRITICAL ANALYSIS OF SOCIAL IMPACT OF AAPNI YOJANA IN DESERT AREA : A REVIEW
Prankur Arya¹
¹Research Scholar Department of Geography, MLSU Udaipur
Keywords – Aapni Yojana, Social Impact, Desert Area.
ABSTRACT
In the previous couple of years, the ground water level in India all in all and in Rajasthan, specifically, is going down. The state is confronting a dry spell like circumstance. Ninety-nine percent dams of Rajasthan are totally or are at the skirt of drying. Significant urban communities like Bharatpur, Jaipur, Jodhpur and Udaipur are confronting the huge issue of drinking water. Over the most recent couple of years, the number of inhabitants in these cities has been expanded exponentially, prompting an intense deficiency of drinking water. Lamentably, with decreasing assets of drinking water, the human conduct towards water protection isn’t evolving. During the present investigation, endeavours have been made to evaluate the diverse salary bunch purchaser’s conduct as for the decreasing water supply. It has been seen that because of little mindfulness, individuals are utilizing substantially more water than it is required. This should be tended to quickly by changing open observation towards water use through media and by sorting out open mindfulness programs. It is trusted that the after effects of the investigation would profit the urban advancement experts in streamlining the current water assets through appropriate dissemination framework viz a viz society. The expanding deficiencies in urban water supplies were not just on account of the quicker development in the urban populace yet additionally because of the wasteful administration and use of water separated from the advanced urban ways of life. It is in this setting imperative to analyze different parts of urban water supply (i.e., request, supply, deficiencies, funds, the executives, and so forth) so as to figure fitting arrangements. The issues faced by these cities are discussed in this paper with some prospects.
REVIEW OF MACHINE LEARNING ALGORITHMS FOR IT OPERATIONS
Gaurav Tyagi¹, Dr. Rupak Sharma²
¹Research Scholar, Department of Computer Science, Monad University, N.H. 9, Delhi Hapur Road, Hapur (UP), 245304 India
²Assistant Professor, S.R.M. Institute of Science, S.R.M. University, NCR Campus, Delhi Meerut Road, Modinagar Ghaziabad (UP), 201204, India
Keywords –
ABSTRACT
Peer-to-Peer technology has made remarkable progress thanks to the decentralized and distributed approach of it. Most of the applications like as social media, file sharing, long-distance interpersonal communication, etc. are easily implemented with the help of Peer to Peer technology. There is a wide range of these Peer to Peer agreements. Peer-to-Peer networks emerged as a noxious business model that moves the networks depends on server in an instant. Peer to Peer technologies are becoming versatile in development various applications for social networks. In the past two decades (approximately), research on Peer to Peer computing and has received much eye-catching in the academic and industrial field. Peer to Peer rose to jubilant profit systems on the internet. It represents the best end-to-end implementation argument, the often-challenged design philosophies that have led internet design. Doubt factor is the reason why research into Peer to Peer computing is now dropping attention as dramatic as its popularity. This document provides a quick overview of Peer to Peer technology with an emphasis on understanding how a Peer to Peer technology works, what protocol and routing is used in P2P networks, what are the limitations and application areas of Peer to Peer network. The insight of this article presents peer-to-peer technology in Mobile Ad hoc paradigm. Main focus of this article is on Introductory part of Peer to Peer Technology, it also gives the basic knowledge of MANET.
A COMPARATIVE STUDY OF VARIOUS ARCHITECTURES AND
ROUTING PROTOCOL FOR QUALITY OF SERVICE (QoS) IN VANET
Mr Amol S. Dudhe and Dr Salim Y. Amdani
1. Department of Information Technology, Babasaheb Naik College of Engineering, Pusad, India
2. Department of Computer Science & Engg, Babasaheb Naik College of Engineering, Pusad, India
Keywords – VANET, QoS, routing, network.
ABSTRACT
VANETs have gained great focus among the researchers since last few decades. The areas of great interest are the types of routing, and quality of service (Qos). The main challenge is to find the ways to counter the continuously changing VANETs topologies and its high speed nature, and then determining which routing protocols are best suited for a particular transmission type; and which ones provide more consistent and stable routing performances. Routing in networking is one of the key factors in determining how effective and efficient data packets can be transmitted within a network environment. As the topology is consistently ever-changing a reliable communication with needed QoS is of utmost importance. QoS with respect to routing protocol is a domain which demands improvement. Great efforts have and are still being made to improve the routing capabilities of the protocols in existence to enhance QoS mechanisms in routing protocols.
IMPETUS TO THE WIDE CULTIVATION OF SANSKRIT LITERATURE WORKS OF DHOYI, UMAPATIDHARA AND JAYADEVA AND HALAYUDHA MISRA THE BHARMADHYAKSA OF LAKSMANASENA
Dr. Supam Mukherjee
Assiociate Professor of History, S.C.B.C College, Lalbagh, Murshidabad, Pin – 742149, West Bengal, India
Keywords – ‘Saduktikarnamitra’, ‘Kaviksmapati’, ‘Vaidarbhariti’, ‘Assembly of Vikramaditya’, ‘Vaisnava literature’, ‘Gitagovinda’, ‘Raja Pandita’, Lexicographer.
ABSTRACT
Under the patronage of the Sena king Laksmanasena, the study of Sanskrit in Bengal where it was not much enraging up to the time of the beginning of Sena rule, presumably because of the Buddhist influence. He himself composed several Sanskrit verses and some of them are preserved in the Saduktikarnamrita. He also completed the Advutsagara which was left unfinished by his father Vallalasena. His court was ornamented with a large number of famous poets such as Jaydeva, Sarana, Dhoyi, Umapatidhara, Halayudha Misra and other eminent poet’s. At any rate Dhoyi, have been looked upon as the poet-laureate of the Sena Court becauseJaydeva calls him Kaviksmapati, i.e., the king of the poets Joydeva the celebrated author of Gitgovinda, Umapotidhara, the composer of the Deoparaprasasti of the time of VijoyaSena also lived in the period of Laksmanasena. Merutunga in his Prabandha-Cintamani speaks of Umapatidhara as a minister of Laksmanasena. On the other hand, Halayudha Misra was a brilliant luminary in the galaxy of talents that adorned the court of king Laksmanasena in the 12thcentury AD. Halayudha,a versatile scholar equally at home in the different branches oflearning,had acquired proficiency specially in Veda,Purana, Mimamsa and Dharma Sastra. So in this discussion we will try to know the vast literary work in short from in our limited Knowledge.
IMPLEMENTATION OF THE AUTOMATIC DECISION-MAKING SYSTEM AND MONITORING INDUSTRIES USING IoT
Dr A Ravi1, A Khandeswara Rao2, P Pooja SK Reddy3, G Yesu Krupa Kiran4
Department of Electronics & Communication Engineering1,2,3,4
Potti Sriramulu Chalavadi Mallikharjuna Rao College of Engineering & Technology, Vijayawada, India1,2,3,4
Keywords – Microcontroller, Sensors, IoT, Cloud, power measurement, Wi-fi module.
ABSTRACT
Industry is a strong manufacturing base on which rest of country growth depends on. So, automating the industry with newer technology is must to increase economy of the industry. Now a days most of the industries are automated with Robots to reduce work burden of the human being. This automation Includes sensors/actuators to primarily collect and display the data and can be controlled accordingly. As there is need of Industry 4.0 which basically need to connect the Industry to INTERNET is termed as Industrial IoT. In order to increase the efficiency of the industry a regular maintenance is required to keep the industry work going. Here we are using IoT to keep a track on the working condition and surroundings of industries such as Temperature, Power consumption, gas leakage etc., by using Wi-Fi Module. And whenever the current flow increases the power supply is automatically disconnected and the alert notification is sent to the Administrator. These data will be sent to Internet so that where the data would be stored in Data Cloud. By using the advantages of IoT the industries can be regularly monitored. By using this system, the industries will be benefited more.
A STUDY ON APPLICATION OF DATAMINING TECHNIQUES IN BANKING
Dr. C. JEYABHARATHI and B. THENMOZHI
¹Assistant professor and Head, Department of computer science, Arulmigu Palaiandavar Arts College for Women, Palani.
²Research Scholar, Mother Teresa Women’s University, Kodaikanal.
Keywords –
ABSTRACT
Data Mining is a set of techniques used to extract meaningful information from the collected data, enables financial institutions to make better decision-making process. Data mining technology provides the facility to access the right information at the right time from huge volumes of raw data. Banking industries adopt the data mining technologies in various areas especially in customer segmentation and profitability, Predictions on Prices/Values of different investment products, money market business, fraudulent transaction detections, risk predictions, default prediction on pricing. This paper made a survey about the research studies on application of data mining techniques in banking sector. The data mining techniques that are applied for banking sectors such as fraud prevention, fraud detection and identity of credit risk includes SVM, logistic regression, Bayes network, Naive Bayes, Random forest and k-means algorithms.
AUTOMATIC ACCIDENT DETECTION AND RESCUE SYSTEM USING IMAGE PROCESSING AND IOT
Dr. A. Ravi1, T. Raga Phanigna2, Y. Lenina3, P. Ramcharan4, P. Subrahmanya Teja5
1Professor and HOD, 2,3,4,5UG Students, Department of Electronics and Communication Engineering,
Potti Sriramulu Chalavadi Mallikarjunarao College of Engineering and Technology, Vijayawada, Andhra Pradesh, India
Keywords – Image processing, Internet of Things (IoT), Raspberry Pi, Ubidots, Multi SMS Sender (MSS), Vibration Sensor IFTTT.
ABSTRACT
Generally, now-a-days growth of population increasing day by day leading to high demand of automobiles, leading to congestion, traffic hazards and resulting in road accidents and deaths. Majority of deaths occurred due to drowsiness and failure of reaching ambulance to the location on time which increases the chances of death of the victim. Therefore, life of victim is under high risk. This abstract proposes a system which consists of alerting system as well as rescue system. Alerting system alerts the driver with a buzzer using image processing if driver is feeling drowsy. Even if an accident occurred it is detected through vibration sensors which are connected to raspberry pi which collects information from the nature of the driver’s eye as well as from sensors. And the location details of accident area are transmitted to the servers’ using IoT. The “Ubidots” cloud is used to store the obtained results into the server and is used to envision results in its platform, whereas “IFTTT” named cloud is used and its applets sends a message to the parents of the victim. An MSS mobile application is used for the internal communication of the ambulance drivers. In this way by utilizing this accident alert and rescue system diminishes the death rate and also saves not only lives but families.
COMPUTATIONAL FLUID DYNAMICS INVESTIGATION OF THE
SPACE RE-ENTRY VEHICLE
Mr. Ashish.S. Shetty¹, Mr. Abhay.A. Mulgund²
¹Undergraduate Student, M.S Ramaiah Institute of Technology (Autonomous Institute, Affiliated to VTU), Bengaluru, Karnataka State, India
²Undergraduate Student, M.S Ramaiah Institute of Technology (Autonomous Institute, Affiliated to VTU), Bengaluru, Karnataka State, India
Keywords – CFD, Space capsule, Re-entry, Flow-field, Mach number, Angle of Attack.
ABSTRACT
Atmospheric re-entry refers to the movement of human-made objects into the atmosphere of a planet from outer space. Re-entry capsules are blunt shaped bodies designed to withstand high heating experienced during the re-entry phase. In present paperwork we carried out external flow analysis on a re-entry capsule at various Mach speeds and angles of attack, to evaluate the variations of velocity, pressure, density, and temperature profiles and to study the detached bow shockwave characteristics, which are formed around the capsule body during re-entry.
BURGLARY DISCLOSURE SYSTEM
Nilesh Sambhe¹, Rishikesh Chamat², Govind Sharma², Rahul Waghdhare², Yash Moon²
¹Asst.Professor, ²Student YCCE, Nagpur, India
Keywords – CCTV, Trap Wires, Piezo and IR Sensor, Raspberry Pie, GSM, GPS, APP.
ABSTRACT
In today’s world of ever-growing technology security matters a lot and when it comes to personal or precious things or the family’s security it becomes even more important. So, for that very purpose we install CCTV, trap wires, sensors in order to stop intrusions or burglary. But this system has their own disadvantage and for that we propose a system which instantly gives you the output of the intrusion detected in the house or in the office or anywhere we install it. And for this we make use of piezo sensors to detect instantly and quickly any movement detected with use of IR sensor, camera and Raspberry pie. And hence when one gets the message and the image or the video clip he/she can instantly message his/her neighbour or the nearest police station in order to take action since this system will also consider the use GSM which can send message to more people so that if one ignores other might see it and hence action based on the message can be taken. We also propose a device which can be installed on the precious devices which can be tracked through GPS technology and hence the house or any other environment becomes burglary/intrusion free and hence one can now go anywhere without being stressed about the house or precious things or family. To see the image, we also make availability of APP.
CORRELATION AMONG SIMILARITY MEASUREMENTS FOR COLLABORATIVE FILTERING TECHNIQUES: AN IMPROVED SIMILARITY METRIC
Swaleha Zubair*, MuaadhAbdo Al Sabri, Afreen Khan
Department of Computer Science, Aligarh Muslim University, Aligarh, India
Keywords – collaborative filtering, recommendation system, similarity measurement, correlation, distance.
ABSTRACT
Information is rising exponentially over the Internet. The World Wide Web has emerged as a treasure trove of knowledge and provide relevant information pertaining to any exclusive topic as per the individual’s performance or demand. Frequently, the user gets confused while seeing such a large number of over the Internet to choose which one to buy. In this situation, it is essential to filter the available information so as to recommend user about items and determine what different users prescribe. To avoid information overload, we can employ the recommended system that helps us to effectively filter, prioritize and deliver tremendously vital information. A recommendation system refers to a system that can personalize or filter preference in a set of items. Various similarity measures are the key to the analysis. The collaborative filtering recommendation system is supported to be the best approach for personalized user or service recommendations. User-based collaborative filtering approach possesses certain shortcomings, thus item-based collaborative filtering method is taken into consideration. To fill this gap, we compared correlation similarity measures and the distance similarity measures to study the performance of various existing similarity calculation models in order to enhance the recommendation performance. The results of the study were then used to develop an improved method by employing statistical accuracy metrics to give the most accurate recommendation. Therefore, similarity measures can be assessed and contrasted with the outcomes of the similarity measures as discussed in this study. The objective of this paper is to identify appropriate distance measures for datasets and furthermore to facilitate comparison and assessment of the proposed similarity measures with that of conventional ones.
ONLINE SHOPPING: INFLUENCING FACTORS OF AWARENESS AMONG UNIVERSITY SCHOLARS
Dr. Mugeshkannan Reguramana
Assistant Professor, Department of Commerce, PSR Arts and Science College, Sivakasi-626140,
e-mail: mugesh.kannan1910@gmail.com
Ms. M. Jensiranib
Assistant Professor, Department of Commerce, PSR Arts and Science College, Sivakasi-626140
Mr. T. Muthuprakashc
Bachelor of Commerce, Department of Commerce, PSR Arts and Science College, Sivakasi-62614
Keywords – Online shopping, Internet of Things, e-commerce, m-shopping and Awareness.
ABSTRACT
The purpose of this study is to analyze the online shopping awareness level among the university scholars in southern district of Tamilnadu. Online shopping is one of the major aspects of the vibrant and dynamic e-commerce but there is no complete awareness. To know about the awareness among University Scholars, 200 structured questionnaires was distributed and collected from sample respondents, 193 questionnaires was received. Duly filled 186 questionnaires were taken as sample size for this study. The study found that the variable detail information is available while shopping online are positively correlated with the customer’s opinion towards awareness of online shopping in Universities of Southern District. The study concludes that the online seller or online retailer to understand the customer awareness and their satisfaction level towards online shopping to convert potential customers into active one and to retain the existing online customers for the well-being and long-term growth of the online retailers.
GREEN BANKING: NEED OF THE HOUR
¹R.PARTHIBAN & ²R.VISHAL
Final Year Student, Department of Commerce, PSR Arts and Science College, Sivakasi, Tamil Nadu.
Keywords – Environment, Green banking, Reduce, Paper.
ABSTRACT
The present epoch of globalization and economic progress has added a lot of comforts and luxuries to human life. But it has also lead to an alarming situation, enormous loss of biodiversity, climate change and environmental damage. Presently all the sectors in the world economy are facing huge call to deal with environmental problems. Banking activities are not directly related to the environment but the external impact of their customer activities is substantial. All the sectors of the world economy have started to revamp their activities to ensure the protection of our rich natural resources and environment. The banks can play an important role in promoting environmental sustainability. In an emerging economy like India, environmental management is the need of the hour. Green banking means environmental practices and reducing external carbon emissions and external emissions. This may be done in many forms such as using online banking, financing green technology and pollution reducing projects. In the present paper, the concept of green banking has been discussed in detail. The paper also highlights the benefits, products and challenges of green banking in the present times.
CONSUMER PURCHASE DECISION BEHAVIOUR IN OMNI-CHANNEL RETAILING – AN EMPIRICAL STUDY WITH COMPARISON
Dr. MUGESHKANNAN REGURAMAN
Assistant Professor, Department of Commerce, PSR Arts and Science College, Sivakasi 626140,
Email ID: mugesh.kannan1910@gmail.com
MS. T. AISHWARYAGOMATHI
BBA final year, Department of Management, PSR Arts and Science College, Sivakasi-626140.
Mr. V. KANNAN
Bacholar of Business Administration, Department of Management PSR Arts and Science College, Sivakasi-626140
Keywords – Omni-channel, Purchase behaviour, Social Networking Sites, Technology, Internet of Things, E-tailing.
ABSTRACT
This paper aims to investigate the purchase decision behaviour of the Omni-channel retailing on two major metropolitan cities of Tamilnadu (Chennai and Coimbatore) and impact on future purchasing behaviour through the Internet of Things. This study concerned with an empirical in nature with a comparison of two cities, both primary and secondary data have been used for data collection, the questionnaire has been used as the main tool for collecting primary data from 348 respondents in Chennai and 145 respondents in Coimbatore under the convenient sampling method. The result of the study indicate that customer’s pre-purchasing behaviour related to service quality, product quality and convenience play a significant role in Omni-channel shopping in both Chennai & Coimbatore, and also shows that offers and operation quality is the most significant factors among the examined antecedents for Omni-channel shopper in Chennai. Service quality is important for Omni-channel shoppers in Coimbatore where there is a limited service in both Pre and Post purchase. Predict the customer future purchase behaviour, perceived quality and satisfaction played a stronger positive role for Omni-channel shoppers in Coimbatore as compared with Chennai.
AN EFFICIENT APPROACH FOR ENGLISH TO SINDHI LANGUAGE TRANSLATION
Pinky Gangwani, Nisha Balani, Samir Ajani
#Department of Computer Science Engineering, Jhulelal institute of technology,
Nagpur, Maharashtra, India
1pinkygangwani08@gmail.com, 2n.balani@jit.org.in, 3s.ajani@jit.org.in
Keywords – Language Translation, Natural Language Processing, Source Language, Target Language, Vocabulary, Grammar.
ABSTRACT
Language Translation (LT) pertains to translation of one natural language to other by using automated computing. The main objective is to fill the language gap between two different languages speaking people, communities or countries. In India, we have multiple and hugely diverse languages and scripts, hence scope and need of language translation is immense. A translation system essentially takes a text in one language (called the source language (SL)), and translates it into another language (called the target language (TL)). The source and target languages are natural languages such as English, Hindi, etc. Hence a translation system can be said to be doing natural language processing (NLP). In this paper, we proposed a system which takes an input in English Language and translates it into Sindhi Language by using Vocabulary and Grammar (parts of speech & subject + verb + object).